|
Product Details:
Payment & Shipping Terms:
|
Material: | Stainless Steel | Size: | 3x13x19 |
---|---|---|---|
Type: | Inland And Coastal Boats | Certification: | BV |
Trade Mark: | YHX | Trans Packaged: | Paper Packaged |
Fuel Type: | Gasoline | Usage: | Fishing, Ship Launching, Protection |
Engine Position: | Outboard |
Outboard 688-45970-03-98 Boat Motor Stainless Steel Propeller 13x19 for Yamaha 60HP 70HP 75HP 80HP 85HP 90HP 115HP
Descriptions:
Size: 3X13"X19"-K
Number of Blade: 3
Number of Spline: 15
Material: Stainless Steel
Condition: New, All parts are available in stock, we can ship it out within 1-2 business days!
Replacement:
This quality aftermarket propeller can replace for Yamaha Part 688-45970-03-98 .
Applications:
It fit for Yamaha the following outboards:
FT60B/D
60F/70B
75A/C
115A/B/C
130A/B/140A/B/C
PRO75/C/100A
FT50B/C/G
F80A/B/F100A/D
F115A
FL115A
L130A/B/L140A/B/C
Note: This propeller is not made of Aluminum Material, this is made of Stainless Steel, please kindly make sure this would be ok for you before you buy!
This information is critical to determining the correct propeller for your application:
1. 3 Blades
A 3-blade propeller usually offer s top speed performance.
2. Diameter:
Diameter is the distance across a circle encompassing all of the propeller blades.
3. Pitch:
Pitch is the theoretical distance a propeller will move through the water of each revolution.
4. Right hand or left hand Rotation
In most cases, right hand propellers are used for single engine application and one left hand propellers are used for twin engine applications to achieve better steering control.
5. Cupped Blades:
This is a technique used to enhance the performance of propellers under certain conditions. A cupped propeller will exhibit very high efficiency at high speeds as well as minimize cavitation under heavy loads.
6. Rake:
Rake is special design feature. Positive rake benefits from normal bow lift to permit the use of a larger diameter propeller, while negative rake can provide extra blade strength for use in very high speed applications.
Diameter | Pitch | Blades | ||
inches | mm | inches | mm | |
7 1/4 | 184.15 | 5 | 127.00 | 3 |
7 1/4 | 184.15 | 6 | 152.40 | 3 |
7 1/2 | 190.50 | 7 | 177.80 | 3 |
7 1/2 | 190.50 | 8 | 203.20 | 3 |
9 1/4 | 234.95 | 8 | 203.20 | 3 |
9 1/4 | 234.95 | 9 | 228.60 | 3 |
9 1/4 | 234.95 | 10 | 254.00 | 3 |
9 1/4 | 234.95 | 11 | 279.40 | 3 |
9 7/8 | 250.83 | 10 1/2 | 266.70 | 3 |
9 7/8 | 250.83 | 12 | 304.80 | 3 |
9 7/8 | 250.83 | 13 | 330.20 | 3 |
11 1/8 | 282.58 | 13 | 330.20 | 3 |
11 5/8 | 295.28 | 11 | 279.40 | 3 |
11 3/8 | 288.93 | 12 | 304.80 | 3 |
13 1/2 | 342.90 | 15 | 381.00 | 3 |
13 1/4 | 336.55 | 17 | 431.80 | 3 |
13 | 330.20 | 19 | 482.60 | 3 |
13 3/4 | 349.25 | 15 | 381.00 | 3 |
13 | 330.20 | 17 | 431.80 | 3 |
13 3/4 | 349.25 | 17 | 431.80 | 3 |
13 3/4 | 349.25 | 19 | 482.60 | 3 |
14 1/2 | 368.30 | 19 | 482.60 | 3 |
Contact Person: Lucy
Tel: +8615020046199