Aluminum Boat Performance Propellers Yamaha Outboard Props 6G5-45945-01-98

Aluminum Outboard Propeller 14 x19 for YAMAHA Engines 150-250HP 6G5-45945-01-98

• Diameter: 14"
• Pitch: 19"
• 15 Spline Tooth
• Material: Aluminum
• Used for YAMAHA Outboard Engines 150-250HP

We design and supply all propulsion system for container vessels, cargo vessels, tankers, bug boats, trawlers and fishing boats. Including Main engine ,gearbox, shaftings, FPP, CPP, rudder propellers, Tunnel thrusters, azimuth thrusters, water jets and main propulsion assembly.

We can manufactrue the propellers as your drawings.More information pl fell free to contact us.

1. Punctual delivery time:
 

• We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
• Shipping notice/ insurance to you as soon as your order is shipped.

2. After sales service:

• After receive the goods, We accept ur feedback at first time.
• We could provide installation guide, if you have need, we could give you global service.
• Our Sales are 24-hours online for ur request

3. Professional sales:

• We value every inquiry sent to us, ensure quick competitive offer.
• We cooperate with customer to bid tenders. Provide all necessory docuement.
• We are a sales team, with all techinical support from engineer team

This information is critical to determining the correct propeller for your application:
1.3 Blades
3- blade propeller usually offer s top speed performance.
2. Diameter:
Diameter is the distance across a circle encompassing all of the propeller blades.
3. Pitch:
Pitch is the theoretical distance a propeller will move through the water of each revolution.
4. Right hand or left hand Rotation
In most cases, right hand propellers are used for single engine application and one left hand propellers are used for twin engine applications to achieve better steering control.
5. Cupped Blades:
This is a technique used to enhance the performance of propellers under certain conditions. A cupped propeller will exhibit very high efficiency at high speeds as well as minimize cavitation under heavy loads.
6. Rake:
Rake is special design feature. Positive rake benefits from normal bow lift to permit the use of a larger diameter propeller, while negative rake can provide extra blade strength for use in very high speed applications.
 

Main Advantages
1. smaller diameter of the propeller hub can reduce the total propeller weight, increase the ship speed, energy-efficient and also lower the manufacture cost of the propeller
2. the hub diameter ratio for the blade against the propeller hub is lower which make sure the best propulsion
3. the high quality material makes sure longer serving life for the propeller

Company Profile
Qingdao Yonghexing Houseboat Propeller Factory was founded in 2000,located in JIMO district Qingdao city China .We are a professional manufacturer in outboard /stern drive propellers and impellers for personal watercraft vehicles.

Our propeller can match the size and type with YAMAHA, MERCURY,HONDA,SUZUKI,TOHATSU and other brands engines .
Meanwhile,We also produce marine anodes,and other accessories made by copper ,aluminum alloy ,rubber, Stainless steel and numerical control matching for outboard motors.

We have an outstanding R&D team with superior CAD,CAM and CAE capabilities to meet the customers’ various requirement .

We have always been instilling a high level of quanlity consciousness and controlling every aspect of quanlity in terms of thickness ,corrosion resistance ,resistance against rust and collisions ,also we installed analysis equipment to assist the inspection and testing process .

After many years of develpment ,Our propellers are distributed to 25 contries and regions in the world and recognized by more and more customers .We are constantly improving process and striving even higher.

FAQ
- Are you a manufacturer?
Yes, we are a professional Propeller and Marine Boat manufacturer over 12 years experience.,with our own factory in Qingdao .

- How many engineers are there in your R & D department?
There are more than 8 experienced engineers in my company, in which there are 3 of them are working in R & D department.

- How many days will a new development item need?
Usually,we will prepare the molds and counter samples for a general part in 30-40days.

- What is the lead time for the general production order?
About 1 months according to the quantities.

- What's your strength?
We are specialized in marine propeller ,Jet Ski Impeller , all kinds of aluminum alloy leisure boat ,fishing boat ,working boat .
we have been suppling to global market for over 8 years with good quanlity ,competitive price and a wide range of categories .